Replacing and aligning ink cartridges for Canon and most other inkjet printers used in your business is a user-friendly process requiring only a few moments to complete. Ink cartridges are seated.
Size:Download
aPlace the machine on a flat and horizontal surface, and do not place any objects in front of the machine. Open the Sheet Feeder Cover and pull the Paper Support, then the Paper Output Tray and open the Output Tray Extension.
Caution Before turning on the machine, remove all of the shipping tapes.
Important Do not connect the USB cable until after the software is installed.
Note To open the Paper Output Tray, put your finger in the rounded indent of the tray and open it gently.
bPlug the power cord in the back of the machine and connect the other end to the wall outlet.
Important Make sure that the Document Cover is closed.
cOpen the Operation Panel, then press theON/OFF button to turn on the machine.
dUse the{ or} button on the Operation Panel to select the language for the LCD, then press theOK button.
(1)Press the { or} button to select the language.
(2)Press the OK
button.
Important If an unintended language is displayed on the LCD, press the Back button to return to the Language selection screen.
Once the message “Install the print head and set the ink tank.” appears, go to e.
eOpen the Scanning Unit (Printer Cover) until it locks into place. The Print Head Holder moves to the center.
Scanning Unit (Printer Cover)
aRemove the Print Head from its package.
Caution There may be some transparent or light blue ink on the inside of the bag the print head comes in, or the inside of the protective cap - this has no effect on print quality. Be careful not to get ink on yourself when handling these items.
bRemove the orange protective cap from the Print Head and discard it.
Electrical Contacts
Important For your safety, always firmly grip the areas illustrated when opening the Scanning Unit (Printer Cover).
fOpen the Inner Cover. Write down the serial number located inside the machine. You will need this to register your product.
dInsert the Print Head.
Do not touch!
eLower the Print Head Lock Lever
carefully.
3 Install the Ink Tanks
aPeel back the orange tab completely and remove the plastic wrapper from the ink tank.
If the
bTwist off and discard the orange protective cap located on the bottom of the ink tank.
Protective Cap Do not press!
Ink Port
Electrical Contacts
Important
•Do not touch the electrical contacts.
•Do not touch the ink port.
dMake sure the ink lamp lights red.
Refer to the color guide on the Print Head Lock Lever.
eClose the Inner Cover and the
Scanning Unit (Printer Cover).
Important
•For your safety, always firmly grip the areas illustrated when closing the Scanning Unit (Printer Cover).
•The machine starts operating. Wait about 2 minutes until the machine stops making noise.
4 Align the Print Head
aPinch the Paper Guide and slide it to the left end.
Paper Support
Extension
Paper Guide
bLoad a sheet of letteror
Paper Guide
Print Side
Hardware setup and Print Head alignment is complete.
cMake sure thatYes is selected in the message requesting head alignment, then press theOK button.
Turn the
For details, refer to “Basic Operation for the Operation Panel” in the Quick Start Guide.
can also use the {, , or] button to
Note Print Head alignment takes about 6 minutes to complete. Do not start another operation here.
The pattern is printed. And Print Head is aligned automatically.
OK
Cassette
For information on how to load paper in the
Cassette, refer to “Loading Paper in the
Cassette” in “Loading Printing Paper” of the
Quick Start Guide.
Note
•The pattern is printed in black and blue.
•When Automatic Print Head Alignment cannot be executed correctly, the message “Auto head align has failed.” is displayed on the LCD. Refer to “Error Message is Displayed on the LCD” in theUser’s Guide
Windows
Note
•The screens below refer to Windows XP Service Pack 2 installation. Screens may vary depending on the operating system you are using.
•For Windows XP or Windows 2000, log on to Windows as a member of the Administrators group before continuing.
•Before installing the driver, disable all
aTurn off the machine.
(1)Press the ON/OFF button.
(2)Make sure that the POWER lamp stops flashing.
bTurn the computer on and start Windows.
Important
If you see the Found New Hardware Wizard, remove the USB cable. Click Cancel to quit the screen. Next, turn off the machine. Then proceed from step 3 to install the MP Drivers.
fRead the License Agreement carefully and clickYes. Follow the
gWhen thePrinter Connection screen appears, connect the machine with a USB cable, then turn the machine on. The software will begin identifying the printer port being used.
Important
If you cannot go to the next procedure after 3 minutes, refer to “Troubleshooting” instructions in the User’s Guide
Manual Print Head Alignment Canon Mp600 Mac Software
•The screens below refer to Mac OS X v.10.4.x installation. Screens may vary depending on the operating system you are using.
•Log on as an Administrator before continuing.
•Before installing the driver, disable all
aConnect one end of the USB cable to the computer, the other to the machine.
Note Make sure the machine is turned on.
Print Head Alignment Canon Pixma
gWhen the list of applications to install appears, confirm the contents, then clickInstall.
Note Move the cursor over items to display explanations of each application.
hRead the License Agreement carefully and clickYes. Follow the
iFollow the
Note When theUser Registration screen appears, follow
jWhen the Installation completed successfullyscreen appears, click Restart.
cInsert the Setup
Note
The setup program should run automatically. If the installer in the
dWhen the main menu appears, clickEasy Install.
Note
•Select Easy Install in order to install the MP Drivers,
•To install Adobe® RGB (1998), clickCustom Install and follow the
![]()
eWhen the list of applications to install appears, confirm the contents, clickInstall.
Note
Move the cursor over items to display explanations of each application.
Manual Print Head Alignment Canon Mp600 Mac Driver
https://amberspire.weebly.com/mac-os-x-mavericks-manual-download.html. hFollow the
Note When theUser Registration screen appears, follow
iWhen the Installation completed successfullyscreen appears, click Exit.
If Restart is displayed, make sure that theRestart the system now (recommended) check box is selected, then clickRestart.
Now you have completed installation of the software.
fWhen the main menu appears, clickEasy Install.
Note SelectEasy Install in order to install the MP Drivers,
The system is restarted automatically.
Manual Print Head Alignment Canon Mp600 Machine
*When using Mac OS X v.10.2.8 to v.10.3.3: Restarting the computer while connected to the machine may cause the machine not to be detected. To resolve this, either unplug the USB cable then plug it back in again, or turn the machine off then back on again.
kAfter restarting the computer, start Printer Setup Utility (start Print Center if you are using Mac OS X v.10.2.8) and then check that the printer name you want to use is shown inPrinter List. If the printer name is not displayed, clickAdd to add the device. For more detailed instructions, refer to the Mac
Print Head Alignment Canon Mx310
Now you have completed installation of the software.
Comments are closed.
|
AuthorWrite something about yourself. No need to be fancy, just an overview. ArchivesCategories |